user manual

13-13

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-05

Chapter 13 Diagnostics and Troubleshooting

Using Diagnostic Pages

Event Log Page

The Event Log page lists access point events and provides links to the Event Display Setup and Event

Log Summary pages. You can also open Station pages for devices listed in the event log. Figure 13-9

shows an Event Log page example.

Figure 13-9 Event Log Page

Click the Logs link at the top of any main management system page to reach the Event Log page.

Display Settings

Use the entry fields and the buttons at the top of the page to control the event list. Fields and buttons

include:

• Index—Specifies the first event to display in the event list. The most recent event is 0; earlier events

are numbered sequentially. To apply your entry, click Apply New.

• Number of Events—Specifies the number of events displayed on the page. To apply your entry, click

Apply New.

• Next—Displays earlier events in the log.

• Prev—Displays more recent events in the log.

• Apply New—Changes the display by applying the settings in the Index and Number of Events fields.

• Purge Log—Permanently deletes all events from the log.

• Additional Display Filters—A link to the Event Display Setup page, where you can change time and

severity level settings.

209.165.201.7