user manual

13-10
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 13 Diagnostics and Troubleshooting
Using Diagnostic Pages
Figure 13-8 AP Radio Port Page
Like the Network Ports and Ethernet Port pages, the AP Radio Port page lists statistics in a table divided
into sections. Each row in the table is explained below.
Configuration Information
• The top row of the Configuration section of the table contains a Set Properties link that leads to the
AP Radio Hardware page. See the “Entering Radio Hardware Information” section on page 3-10 for
details on the AP Radio Hardware page.
• Status of “awc0”—awc0 (Aironet Wireless Communications) is part of Cisco Aironet's naming
convention for this radio. This field displays one of three possible operating states:
– Up—The port is operating properly.
– Down—The port is not operating.
– Error—The port is in an error condition.
• Maximum Rate (Mbps)—Maximum rate of data transmission in megabits per second. Data rates set
to basic are followed by B.
• IP Addr.—The IP address of the radio port.
• MAC (Media Access Control) Addr.—A unique identifier assigned to the network interface by the
manufacturer.