user manual

11-3
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 11 Management System Setup
SNMP Setup
The Browse Management Information Base (MIB) link at the bottom of the SNMP Setup page leads to
the Database Query page.
Using the Database Query Page
Use the Database Query page to to find and change the value of many access point managed objects.
Figure 11-2 shows the Database Query page.
Figure 11-2 Database Query Page
Follow this link path to reach the Database Query page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click SNMP in the Services section of the page.
3. On the SNMP Setup page, click Browse Management Information Base (MIB).
Settings on the Database Query Page
The Database Query page contains the following entry fields and buttons:
• OID—Type the object identifier (OID) in the OID field. You can use the integer or ASCII version
of the OID. If you use the integer version of the OID, you must type the entire OID string
(1.3.7.2.13.78.5.6, for example). If you use the ASCII name, you can often use the object's name as
specified in the appropriate MIB (enableSNMP, for example).
• Va l ue —When you click Get, the object's value appears in the Value field. If you want to assign a
value to an object, you type an SNMP value in this field and click Set.
• Get—Click Get to find an object's value.
• Set—Click Set to assign a value to an object.
• Reset—Click Reset to return the page to default settings.