user manual

10-3
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 10 Managing Firmware and Configurations
Updating Firmware
Figure 10-2 Update All Firmware Through Browser Page
Follow these steps to update all three firmware components through the browser:
Step 1 If you know the exact path and filename of the new firmware image file, type it in the New File for All
Firmware entry field.
If you aren’t sure of the exact path to the new firmware image file, click Browse... next to the New File
entry field. When the File Upload window appears, go to the directory that contains the firmware image
file and select the file. Click Open.
Step 2 When the filename for the new firmware appears in the New File entry field, click Browser Update Now
to load and install the new firmware. When the update is complete, the access point automatically
reboots.
Note The access point only updates the radio firmware if the radio firmware version to be loaded is
newer than the firmware in the radio.
Selective Update of the Firmware Components
To update firmware components individually, click Through Browser on the Selectively Update
Firmware line on the Cisco Services Setup page. The Update Firmware Through Browser page appears.
Figure 10-3 shows the Update Firmware Through Browser page.