user manual

10-2
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 10 Managing Firmware and Configurations
Updating Firmware
Updating Firmware
You use the Cisco Services Setup page to update the access point’s firmware. You can perform the update
by browsing to a local drive or by using FTP to update the firmware from a file server. Figure 10-1 shows
the Cisco Services Setup page.
Figure 10-1 Cisco Services Setup Page
Follow this link path in the browser interface to reach the Cisco Services Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Cisco Services Setup.
Updating with the Browser from a Local Drive
When you update the firmware with your browser, you browse to your hard drive or to a mapped network
drive for the new firmware. You can update the four firmware components—the management system
firmware, the firmware web pages, and the radio firmware for both radios—individually or all at once.
It is simplest to update all the components at once, but in some situations you might want to update them
individually.
Full Update of the Firmware Components
To update all the firmware components at the same time, click Through Browser on the Fully Update
Firmware line on the Cisco Services Setup page. The Update All Firmware Through Browser page
appears. Figure 10-2 shows the Update All Firmware Through Browser page.