user manual

9-15
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 9 Network Management
Enabling Wireless Network Accounting
Acct-Authentic The method with which the client device is authenticated to the network. This
value is always 1, which represents RADIUS authentication. The access point
sends this attribute to the server with all three status types.
NAS-Identifier The network access server (NAS) sending the accounting data; for wireless
networks, the name of the access point sending the accounting information.
The access point sends this attribute to the server with all three status types.
Acct-Session-Time The elapsed time in seconds that the client device has been associated to the
access point. The access point sends this attribute only with the ACCT_STOP
and ACCT_UPDATE status types.
Acct-Input-Octets The number of octets received on the wireless network through the access
point since the client device associated to the access point. The access point
sends this attribute only with the ACCT_STOP and ACCT_UPDATE status
types.
Acct-Output-Octets The number of octets sent on the wireless network through the access point
since the client device associated to the access point. The access point sends
this attribute only with the ACCT_STOP and ACCT_UPDATE status types.
Acct-Input-Packets The number of packets received on the wireless network through the access
point since the client device associated to the access point. The access point
sends this attribute only with the ACCT_STOP and ACCT_UPDATE status
types.
Acct-Output-Packets The number of packets sent on the wireless network through the access point
since the client device associated to the access point. The access point sends
this attribute only with the ACCT_STOP and ACCT_UPDATE status types.
Acct-Terminate-Cause How the client device’s session was terminated. This attribute lists the same
cause for every disassociated client device: Loss of service. The access point
sends this attribute only with the ACCT_STOP status type.
Acct-Delay-Time The delay between the time the event occurred and the time that the attribute
was sent to the server. The access point sends this attribute to the server with
all three status types.
RADIUS_IPADR The IP address of the access point sending the accounting information. The
access point sends this attribute to the server with all three status types.
Table 9-1 Accounting Attributes the Access Point Sends to the Accounting Server (continued)
Attribute Definition