user manual

9-13
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 9 Network Management
Enabling Wireless Network Accounting
Figure 9-8 Accounting Setup Page
Follow this link path to reach the Accounting Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Accounting under Services.
Settings on the Accounting Setup Page
The Accounting Setup page contains these settings:
• Enable accounting—Select Enabled to turn on accounting for your wireless network.
• Enable delaying to report stop—Select this option to delay sending a stop report to the server when
a client device disassociates from the access point. The delay reduces accounting activity for client
devices that disassociate from the access point and then quickly reassociate.
• Minimum delay time to report stop (sec.)—Enter the number of seconds the access point waits
before sending a stop report to the server when a client device disassociates from the access point.
The delay reduces accounting activity for client devices that disassociate from the access point and
then quickly reassociate.
• Server Name/IP—Enter the name or IP address of the server to which the access point sends
accounting data.
• Server Type—Select the server type from the pull-down menu. RADIUS is the only menu option;
additional types will be added in future software releases.