user manual

8-24
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 8 Security Setup
Setting Up MAC-Based Authentication
Figure 8-12 AP Radio Advanced Page
Step 16
Select Disallowed from the pull-down menu for Default Unicast Address Filter for each authentication
type requiring MAC-based authentication.
For example, if the radio is configured for both open and Network-EAP authentication, you could set
Default Unicast Address Filter under Open to Disallowed but leave Default Unicast Address Filter under
Network-EAP set to Allowed. This configuration forces client devices using open authentication to
authenticate using MAC addresses but does not force LEAP-enabled client devices to authenticate using
MAC addresses. To force all client devices to authenticate using MAC addresses, select Disallowed for
all the enabled authentication types.