user manual

7-19
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 7 Configuring Other Settings
Event Notification Setup
Default Activity Timeout (seconds) Per Device Class
These settings determine the number of seconds the access point continues to track an inactive device
depending on its class. A setting of zero tells the access point to track a device indefinitely no matter
how long it is inactive. A setting of 300 equals 5 minutes; 1800 equals 30 minutes; 28800 equals 8 hours.
Event Notification Setup
You use the Event Display Setup, Event Handling Setup, and Event Notifications Setup pages to
customize the display of access point events (alerts, warnings, and normal activity).
Event Display Setup Page
You use the Event Display Setup page to determine how time should be displayed on the Event Log. In
addition, you can determine what severity level is significant enough to display an event. Figure 7-9
shows the Event Display Setup page.
Figure 7-9 The Event Display Setup Page
Follow this link path to reach the Event Display Setup page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Display Defaults under Event Log.
Settings on the Event Display Setup Page
The Event Display Setup page contains the following settings:
• How should time generally be displayed?
• How should Event Elapsed (non-wall-clock) Time be displayed?
• Severity Level at which to display events