user manual

6-25
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 6 Configuring Proxy Mobile IP
Configuring Proxy Mobile IP
Step 5 Define an entry for each Proxy Mobile IP-enabled access point (Figure 6-20).
Figure 6-20 Network Configuration Screen for an Access Point Client
Step 6
Add a User entry for each mobile node (client device). Use the “cisco-av-pair” syntax as detailed in
Figure 6-21.
Figure 6-21 User Setup Screen
Note If this option does not appear, enable it for the specific user or an entire group under Interface
Configuration, “Radius (Cisco IOS/PIX)”, “cisco-av-pair”)
Step 7 Refer to the authentication logs and verify that all devices are communicating properly with the ACS
server (Figure 6-22).