user manual

6-22
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 6 Configuring Proxy Mobile IP
Configuring Proxy Mobile IP
Figure 6-15 Proxy Mobile IP General Page
Step 8
Set the Enable Proxy Mobile IP setting to yes.
Step 9 Enter the IP address of the access point in the Authoritative AP 1 field.
Step 10 Click OK. You are returned to the Proxy Mobile IP Setup page.
Step 11 If you are using a CiscoSecure ACS server for security associations, go to the “Configuring Mobile IP
Security Associations on a CiscoSecure ACS Server” section on page 6-23
Step 12 From the Proxy Mobile IP Setup page, select Local SA Bindings. The Local SA Bindings page appears
(Figure 6-17).
Figure 6-16 Local SA Bindings Page
Step 13
Add the entries for a specific host or a range of IP addresses of mobile nodes, along with a Group SPI
and Group Key.
Step 14 Click OK. You are returned to the Proxy Mobile IP Setup page.