user manual

Contents

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-01

Log Headings 13-14

Saving the Log 13-14

Event Log Summary Page 13-14

Using Command-Line Diagnostics 13-15

Entering Diagnostic Commands 13-16

Diagnostic Command Results 13-17

:eap_diag1_on 13-17

:eap_diag2_on 13-18

:vxdiag_arpshow 13-18

:vxdiag_checkstack 13-20

:vxdiag_hostshow 13-21

:vxdiag_i 13-22

:vxdiag_ipstatshow 13-23

:vxdiag_memshow 13-24

:vxdiag_muxshow 13-25

:vxdiag_routeshow 13-26

:vxdiag_tcpstatshow 13-27

:vxdiag_udpstatshow 13-28

Tracing Packets 13-28

Reserving Access Point Memory for a Packet Trace Log File 13-28

Tracing Packets for Specific Devices 13-29

Tracing Packets for Ethernet and Radio Ports 13-30

Viewing Packet Trace Data 13-30

Packets Stored in a Log File 13-30

Packets Displayed on the CLI 13-31

Checking the Top Panel Indicators 13-31

Finding an Access Point by Blinking the Top Panel Indicators 13-33

Checking Basic Settings 13-34

SSID 13-34

WEP Keys 13-34

EAP Authentication Requires Matching 802.1x Protocol Drafts 13-34

Resetting to the Default Configuration 13-36

APPENDIX

A Channels, Power Levels, and Antenna Gains A-1

Channels A-2

IEEE 802.11a A-2

IEEE 802.11b A-3

Maximum Power Levels and Antenna Gains A-3

IEEE 802.11a A-3