user manual

5-13
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 5 Configuring Filters and QoS
Applying QoS
The best example of this is the negotiations between the access point and a Symbol VoIP WLAN handset.
A protocol has been defined by Symbol that allows the handset to be identified by the access point and
given interactive voice classification. Follow these steps to enable this feature.
Step 1 Browse to the Setup screen on the access point.
Step 2 Click Protocol Filters in the Associations section. The Protocol Filters Setup page appears
(Figure 5-10).
Figure 5-10 Protocol Filters Setup Page
Step 3
Click Quality of Service for the radio you wish to configure. The AP Radio Quality of Service page
appears (Figure 5-11).
Figure 5-11 AP Radio Quality of Service Page
Step 4
Click the yes radio button in the Use Symbol Extensions setting.