user manual
Table Of Contents
- Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
- Preface
- Overview and Physical Description
- Chassis Physical Overview
- Cisco ASR 9010 Router
- Cisco ASR 9006 Router
- Cisco ASR 9904 Router
- Cisco ASR 9922 Router
- Cisco ASR 9912 Router
- Field Replaceable Units
- Rack-Mounting Considerations
- Chassis Slots
- Fiber and Interface Cable Management
- Routing of DC Power Tray Source Cables
- Slot Numbering and Marking
- Power Module Hardware and Software Identification
- Route Switch Processor and Route Processor Cards
- RSP Front Panel and Access Ports
- RP Front Panel and Access Ports
- Management Features
- Alarm Connector
- Serviceability
- RSP and RP Card Ejector Levers
- Fabric Controller Card
- FC Card Ejector Levers
- Ethernet Line Cards
- Line Card Front Panel and Access Ports
- Line Card Serviceability
- Line Card Ejector Levers
- Power System
- AC and DC Power Modules
- Cooling System
- Cooling Path
- Fan Trays
- Management and Configuration
- Line Card Front Panel and Access Ports
- Line Card Serviceability
- Line Card Ejector Levers
- Power System
- Functional Description
- Router Operation
- Route Switch Processor Card
- Route Processor Card
- Front Panel Connectors
- Management LAN Ports
- Console Port
- Auxiliary Port
- Alarm Out
- Synchronization Ports
- RP USB Port
- Front Panel Indicators
- LED Matrix Display
- LED Matrix Boot Stage and Runtime Display
- LED Matrix CAN Bus Controller Error Display
- Push Buttons
- Functional Description
- Switch Fabric
- Unicast Traffic
- Multicast Traffic
- Route Processor Functions
- Processor-to-Processor Communication
- Route Processor/Fabric Interconnect
- Fabric Controller Card
- FC Card Front Panel Indicator
- Ethernet Line Cards
- Functional Description
- 40-Port Gigabit Ethernet (40x1GE) Line Card
- 8-Port 10-Gigabit Ethernet (8x10GE) 2:1 Oversubscribed Line Card
- 4-Port 10-Gigabit Ethernet (4x10GE) Line Card
- 8-port 10-Gigabit Ethernet (8x10GE) 80-Gbps Line Rate Card
- 2-Port 10-Gigabit Ethernet + 20-port 1-Gigabit Ethernet (2x10GE + 20x1GE) Combination Line Card
- 16-port 10-Gigabit Ethernet (16x10GE) Oversubscribed Line Card
- 24-Port 10-Gigabit Ethernet Line Card
- 36-port 10-Gigabit Ethernet Line Card
- 2-port 100-Gigabit Ethernet Line Card
- 1-Port 100-Gigabit Ethernet Line Card
- Modular Line Cards
- 20-port Gigabit Ethernet Modular Port Adapter
- 8-port 10-Gigabit Ethernet Modular Port Adapter
- 4-Port 10-Gigabit Ethernet Modular Port Adapter
- 2-port 10-Gigabit Ethernet Modular Port Adapter
- 2-Port 40-Gigabit Ethernet Modular Port Adapter
- 1-Port 40-Gigabit Ethernet Modular Port Adapter
- Power System Functional Description
- Power Modules
- Power Module Status Indicators
- System Power Redundancy
- AC Power Trays
- AC Tray Power Switch
- AC Input Voltage Range
- DC Output Levels
- AC System Operation
- Power Up
- Power Down
- DC Power Trays
- DC Tray Power Switch
- DC Power Tray Rear Panel
- DC Power Tray Power Feed Indicator
- DC System Operation
- Power Up
- Power Down
- Cooling System Functional Description
- Cooling Path
- Fan Trays
- Cisco ASR 9010 Router Fan Trays
- Cisco ASR 9006 Router Fan Trays
- Cisco ASR 9904 Router Fan Tray
- Cisco ASR 9922 Router and Cisco ASR 9912 Router Fan Trays
- Status Indicators
- Fan Tray Servicing
- Slot Fillers
- Chassis Air Filter
- Speed Control
- Temperature Sensing and Monitoring
- Servicing
- System Shutdown
- System Management and Configuration
- Cisco IOS XR Software
- System Management Interfaces
- Command-Line Interface
- Craft Works Interface
- XML
- SNMP
- SNMP Agent
- MIBs
- Online Diagnostics
- High Availability and Redundant Operation
- Features Overview
- High Availability Router Operations
- Stateful Switchover
- Fabric Switchover
- Active/Standby Status Interpretation
- Non-Stop Forwarding
- Nonstop Routing
- Graceful Restart
- Process Restartability
- Fault Detection and Management
- Power Supply Redundancy
- AC Power Redundancy
- DC Power Redundancy
- Detection and Reporting of Power Problems
- Cooling System Redundancy
- Cooling Failure Alarm
- Technical Specifications
1-9
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 1 Overview and Physical Description
Rack-Mounting Considerations
Rack-Mounting Considerations
The chassis width of the Cisco ASR 9000 Series Routers fits into the following racks:
• Telco racks with a rail-to-rail dimension of 17.50 inches (44.54 cm) for the Cisco ASR 9010 Router
• Telco racks with a rail-to-rail dimension of 17.75 inches (45.09 cm) for the Cisco ASR 9006 Router
• Telco racks with a rail-to-rail dimension of 17.75 inches (45.09 cm) for the Cisco ASR 9904 Router
• Telco racks with a rail-to-rail dimension of 17.75 inches (45.09 cm) for the Cisco ASR 9922 Router
• Telco racks with a rail-to-rail dimension of 17.75 inches (45.09 cm) for the Cisco ASR 9912 Router
• EIA racks 19 inches (48.26 cm) wide
• Adaptable to 23 inches (58.42 cm) to fit into ETSI racks 23.62 inches (60.00 cm) wide
The Cisco ASR 9010 Router chassis height is 36.75 inches (93.35 cm) or 21 RU (rack units), which
includes a rack/tray mounting option.Two chassis fit into a commonly used 42 RU rack, and therefore
will fit into an ETSI 45 RU rack with a height of 78.74 inches (200.00 cm).
The Cisco ASR 9006 Router chassis height is 17.50 inches (44.45 cm) or 10 RU (rack units), which
includes a rack/tray mounting option. Four chassis fit into a commonly used 42 RU rack, and therefore
will fit into an ETSI 45 RU rack with a height of 78.74 inches (200.00 cm).
The Cisco ASR 9904 Router chassis height is 10.38 inches (26.36 cm) or 6 RU (rack units), which
includes a rack/tray mounting option. Seven chassis fit into a commonly used 42 RU rack, and therefore
will fit into an ETSI 45 RU rack with a height of 78.74 inches (200.00 cm).
The Cisco ASR 9922 Router chassis height is 77.00 inches (195.58 cm) or 44 RU (rack units). The rail
mounting option height is 1.00 inch. The Cisco ASR 9922 Router chassis will fit into an ETSI 45 RU
rack with a height of 78.74 inches (200.00 cm).
The Cisco ASR 9912 Router chassis height is 52.50 inches (133.35 cm) or 30 RU (rack units). The rail
mounting option height is 1.00 inch. The Cisco ASR 9912 Router chassis will fit into an ETSI 45 RU
rack with a height of 78.74 inches (200.00 cm).
The chassis depth for these five Cisco ASR 9000 Series Routers fits into a 31.50 inch (80.00 cm) deep
EIA rack or an equivalent 80.00 cm deep ETSI rack. This space includes cable management space front
and rear. The chassis has fixed rack mount rails that are set back 5.00 inches (12.7 cm), including front
cable management space.
Note Racks and cabinets require adjustable front rails if the rack/cabinet doors must be able to close with the
chassis installed.
Figure 1-8 shows the top-down view dimensions of the Cisco ASR 9010 Router.
Figure 1-9 shows the top-down view dimensions of the Cisco ASR 9006 Router.
Figure 1-10 shows the top-down view dimensions of the Cisco ASR 9904 Router.
Figure 1-11 shows the top-down view dimensions of the Cisco ASR 9922 Router.
Figure 1-12 shows the top-down view dimensions of the Cisco ASR 9912 Router.