user manual

J-19
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Appendix J Troubleshooting
J.4.14 How Do I Enable or Disable the Automatic Refresh Data Action?
– ONS15808NEService
– UnmanagedNEService
– ONS15216PMService
– ONS15302PMService
– ONS15305PMService
– ONS15310PMService
– ONS15327PMService
– ONS15454PMService
– ONS15454SDHPMService
– ONS15501PMService
– ONS15530PMService
– ONS15540PMService
– ONS15600PMService
– ONS15600SDHPMService
– ONS15800PMService
– ONS15801PMService
– ONS15808PMService
J.4.14 How Do I Enable or Disable the Automatic Refresh Data Action?
The automatic Refresh Data feature automatically refreshes all data being displayed by CTM. When
automatic refresh is enabled, you receive the following prompt:
Refresh Data action suggested. This action will result in closing all windows and might
take some time. Do you want to continue? {Yes | No}
In an unstable environment where NEs are synchronizing or NEs change their operational state
frequently, you might receive the preceding prompt continuously. To disable the prompt:
Step 1 In the Domain Explorer window, choose Edit > User Preferences. The User Preferences dialog box
opens.
Step 2 Click the Miscellaneous tab.
Step 3 To disable the prompt, uncheck the Enable Refresh Data Timer check box. (To enable the prompt, leave
the check box checked.)
Step 4 Click OK.