user manual

J-18
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Appendix J Troubleshooting
J.4.13 How Do I Collect Thread Dumps?
Note The resolution in 24-bit depth is a little lower than is possible with 8-bit depth (1152 x 900 x 76
versus 1280 x 1024 x 76), but the difference is hardly noticeable.
J.4.13 How Do I Collect Thread Dumps?
Thread dumps are helpful references when debugging the CTM process. To collect thread dumps:
Step 1 Log into the server workstation as the root user.
Step 2 On the command line, enter the following command:
thread_dumper [\<Group/Service>\]
where:
• Group is the group name for which to collect thread dumps. It can be:
– SM
– SNMPTRAP
– NE
– PM
– GW
• Service is the service name for which the thread dump is required. It can be:
– SMService
– SNMPTrapService
– CORBAGWService
– ONS15216NEService
– ONS15302NEService
– ONS15305NEService
– ONS15310NEService
– ONS15327NEService
– ONS15454NEService
– ONS15454SDHNEService
– ONS15501NEService
– ONS15530NEService
– ONS15540NEService
– ONS15600NEService
– ONS15600SDHNEService
– ONS15800NEService
– ONS15801NEService