user manual

J-108
Cisco Transport Manager Release 6.0 User Guide
78-16845-01
Appendix J Troubleshooting
J.10.9 Diagnostics Center Problems
– Retrieve the line-level, real-time statistics
• Path Diagnostics
– Retrieve the path-level attributes such as path status
– Perform loopback
– Retrieve the path-level, real-time statistics
• Trunk Diagnostics
– Retrieve the trunk-local and remote-end, real-time statistics
• IMA Group Diagnostics
– Retrieve the IMA group-level attributes such as IMA group status
– Retrieve the accumulated delay on all the IMA links under the IMA group
– Clear the accumulated delay on all the IMA links under the IMA group
– Restart the IMA group
– Retrieve the IMA group ATM cell layer ingress/egress counters
– Retrieve the IMA group-level, real-time statistics
• IMA Link Diagnostics
– Retrieve the IMA link-level attributes such as IMA link status
– Start/stop IMA link test
– Modify IMA link test pattern
– Retrieve the IMA link-level, real-time statistics
• Connection Diagnostics
– Retrieve the connection-level attributes such as connection status
– Retrieve the local and remote endpoint attributes such as A-bit, AIS, and OAM
– Retrieve the local and remote endpoint real-time statistics
The Diagnostics Server interfaces with the CM Server to support the following connection-related
diagnostics operations:
• Connection loopback
• Up connection
• Down connection
• Connection trace
• Test connection
• Test delay
• Test connection segment
• Test ping OAM
J.10.9.1 Diagnostics Center Framework
This section includes the following information:
• J.10.9.1.1 Cannot Launch Diagnostics Center, page J-109
• J.10.9.1.2 Cannot Launch Other Applications from the Diagnostics Center, page J-109