user manual

3-63
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
NOVELL-RIPSAP-MIB
NOVELL-RIPSAP-MIB
The NOVELL-RIPSAP-MIB defines the management information for the RIP and SAP protocols
running in an IPX environment. It provides information in addition to that contained in the IPX MIB
itself. This MIB is virtually identical to the RIPSAP MIB distributed as a part of the Novell NetWare
Link Services Protocol (NLSP) Specification 1.0, Novell Part Number 100-001708-002, 2nd Edition
Feb '94.
OLD-CISCO-APPLETALK-MIB
The OLD-CISCO-APPLETALK-MIB provides information about Appletalk traffic on the router.
OLD-CISCO-CHASSIS-MIB
The OLD-CISCO-CHASSIS-MIB describes chassis objects in devices running an earlier release of the
Cisco IOS operating system. This MIB is deprecated, and is being replaced by the ENTITY-MIB.
However, the Cisco 7304 router implements the OLD-CISCO-CHASSIS-MIB to support earlier network
management applications that do not implement the ENTITY-MIB.
Network management applications that do not support the ENTITY-MIB can use the
OLD-CISCO-CHASSIS-MIB to discover port adapters.
MIB Constraints
The OLD-CISCO-CHASSIS-MIB is deprecated. Most chassis objects are now described in the
ENTITY-MIB; therefore, where possible, we recommend that you use the ENTITY-MIB instead of the
OLD-CISCO-CHASSIS-MIB.
The OLD-CISCO-CHASSIS-MIB is supported on the Cisco 7304 router for modules and port adapters.
Table 3-44 lists the constraints that the router places on objects in the MIB. For detailed definitions of
MIB objects, see the MIB.
Table 3-44 OLD-CISCO-CHASSIS-MIB Constraints for Line Cards and Port Adapters
MIB Object Notes
cardTable
•
cardType The following values are used for 7304 router cards:
Module or Port Adapter cardType Value
PA-A3-T3—pa-atmdx-ds3(406)
PA-A3-E3—pa-atmdx-e3(407)
PA-2FE-FX—cevPa2feFxI82543
PA-2FE-TX— cevPa2feTxI82543
7300-PA-CC—c7300-cc-pa(2138)
• cardOperStatus Port adapter status matches module status.
cardIfIndexTable
Used for port adapters only.