user manual

3-62
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
NOVELL-IPX-MIB
• Refine the MIB logs by using the SNMP SET operation on objects which enable control over log
sizes. This control can be executed on a global basis (affecting the whole Notification Log MIB
database) or on a per named log basis.
• Specify the maximum time a notification can remain logged in the Notification Log MIB.
Note Because this MIB logs all notifications, this ensures that all notifications which are dropped
from the trap queue are also logged by this MIB. Inform retries are not logged. Traps sent to
multiple recipients are logged only one time. Currently, this MIB logs notifications originating
at the local engine only.
Table 3-43 describes the constraints on objects from the NOTIFICATION-LOG-MIB. Any objects not
listed in this table are defined as in the MIB.
Note Apart from the constraints listed in Table 3-43, only the default log is supported in this release. Besides
the named logs, each system has a default log with a name as a zero length string. This log has no security
checking associated with it.
NOVELL-IPX-MIB
The NOVELL-IPX-MIB defines the management information for a system using the IPX protocol. This
MIB is designed to provide a basic framework for the management of systems implementing the IPX
protocol. This MIB is virtually identical to the IPX MIB distributed as a part of the Novell NetWare Link
Services Protocol (NLSP) Specification 1.0, Novell Part Number 100-001708-002, 2nd Edition Feb '94.
NOVELL-NLSP-MIB
The NOVELL-NLSP-MIB defines the management information for the NLSP protocol running in an
IPX environment. It provides information in addition to that contained in the IPX MIB. This MIB is
virtually identical to the NLSP MIB distributed as a part of the Novell NetWare Link Services Protocol
(NLSP) Specification 1.0, Novell Part Number 100-001708-002, 2nd Edition Feb '94.
Table 3-43 NOTIFICATION-LOG-MIB Object Constraints
MIB Object Notes
nlmConfigGlobalEntryLimit
Value is Unsigned32. Read only.
nlmConfigGlobalAgeOut
Value is Unsigned32. Read only.
nlmConfigLogTable
Read only.