user manual

3-59

Cisco 7304 Router MIB Specifications Guide

OL-4925-02

Chapter 3 MIB Specifications

MPLS-VPN-MIB

The MPLS-VPN-MIB:

• Describes managed objects for modeling a Multi-Protocol Label Switching/Border Gateway

Protocol Virtual Private network.

• Configures and monitor routes and route targets for each VRF instance on a router

• Facilitates provisioning VPN Routing and Forwarding (VRF) instances on MPLS interfaces

• Measures the performance of MPLS/BGP VPNs

The MIB is based on Revision 05 of the IETF MPLS-VPN-MIB.

Note Refer to the Cisco MPLS MIB team web page for more documentation on this MIB:

http://mpls-mib-group.cisco.com/.

• mplsTunnelHopIpv6PrefixLen Read-only.

• mplsTunnelHopAsNumber Read-only.

• mplsTunnelHopLspId Read-only.

• mplsTunnelHopType Read-only.

• mplsTunnelHopRowStatus Read-only. Always active(1).

• mplsTunnelHopStorageType Read-only. Volatile(2). Always active.

mplsTunnelResourceIndexNext Read-only. Always 0.

mplsTunnelResourceTable

•

mplsTunnelResourceMaxRate Read-only.

• mplsTunnelResourceMeanRate Read-only.

• mplsTunnelResourceMaxBurstSize Read-only.

• mplsTunnelResourceRowStatus Read-only. Always active(1).

• mplsTunnelResourceStorageType Read-only. Volatile(2). Always active.

Table 3-41 MPLS-TE-MIB Constraints (continued)

MIB Object Notes