user manual

3-58
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
MPLS-TE-MIB
MIB Constraints
Table 3-41 lists the constraints that the Cisco 7304 router places on objects in the MPLS-TE-MIB. For
detailed definitions of MIB objects, see the MIB. Any objects not listed in this table are implemented as
defined in the MIB.
Table 3-41 MPLS-TE-MIB Constraints
MIB Object Notes
mplsTunnelIndexNext Always 0.
mplsTunnelTable
•
mplsTunnelName Read-only.
• mplsTunnelDescr Read-only.
• mplsTunnelIsIf Read-only.
• mplsTunnelXCPointer Read-only.
• mplsTunnelSignallingProto Read-only.
• mplsTunnelSetupPrio Read-only.
• mplsTunnelHoldingPrio Read-only.
• mplsTunnelSessionAttributes Read-only.
• mplsTunnelOwner Read-only.
• mplsTunnelLocalProtectInUse Read-only. Always false(2).
• mplsTunnelResourcePointer Read-only.
• mplsTunnelInstancePriority Read-only. Always 0.
• mplsTunnelHopTableIndex Read-only.
• mplsTunnelIncludeAnyAffinity Read-only. Always 0.
• mplsTunnelIncludeAllAffinity Read-only.
• mplsTunnelExcludeAllAffinity Read-only.
• mplsTunnelPathInUse Read-only.
• mplsTunnelRole Read-only.
• mplsTunnelTotalUpTime Read-only.
• mplsTunnelInstanceUpTime Read-only. Always 0.
• mplsTunnelAdminStatus Read-only.
• mplsTunnelRowStatus Read-only. Always active(1).
• mplsTunnelStorageType Read-only. Volatile(2). Always active.
No constraints on other table objects.
mplsTunnelHopListIndexNext Read-only. Always 0.
mplsTunnelHopTable
•
mplsTunnelHopAddrType Read-only.
• mplsTunnelHopIpv4Addr Read-only.
• mplsTunnelHopIpv4PrefixLen Read-only.
• mplsTunnelHopIpv6Addr Read-only.