user manual

3-56
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
MPLS-LSR-MIB
• mplsInSegmentPackets Read-only. Always 0.
• mplsInSegmentHCOctets Read-only. Always 0.
• mplsInSegmentErrors Read-only. Always 0.
• mplsInSegmentDiscards Read-only. Always 0.
• mplsInSegmentPerforDiscontinuityTime Read-only. Always 0.
mplsOutSegmentTable
•
mplsOutSegmentIfIndex Read-only.
• mplsOutSegmentPushTopLabel Read-only.
• mplsOutSegmentTopLabel Read-only.
• mplsOutSegmentNextHopIpAddrType Read-only.
• mplsOutSegmentNextHopIpv4Addr Read-only.
• mplsOutSegmentNextHopIpv6Addr Always 0.
• mplsOutSegmentOwner Read-only. Other(1).
• mplsOutSegmentTrafficParamPtr Always 0.
• mplsOutSegmentRowStatus Read-only. Active(5).
• mplsOutSegmentStorageType Read-only. Volatile(2).
• mplsOutSegmentAdminStatus Read-only. Always up(1).
• mplsOutSegmentOperStatus Always up(1).
mplsOutSegmentPerfTable
•
mplsOutSegmentOctets Read-only. Always 0.
• mplsOutSegmentPackets Read-only. Always 0.
• mplsOutSegmentHCOctets Read-only. Always 0.
• mplsOutSegmentErrors Read-only. Always 0.
• mplsOutSegmentDiscards Read-only. Always 0.
• mplsOutSegmentPerfDiscontinuityTime Read-only. Always 0.
mplsXCTable
•
mplsXCLspId Read-only. Does not support tunnel IDs.
• mplsXCLabelStackIndex Read-only. Value is set to 0 because
XCLabelStack is unsupported.
• mplsXCIsPersistent Read-only.
• mplsXCOwner Read-only. Other(1).
• mplsXCRowStatus Read-only.
• mplsXCStorageType Read-only.
• mplsXCAdminStatus Read-only. Always up(1).
• mplsXCOperStatus Always up(1).
• mplsOutSegmentIndexNext Read-only.
Table 3-40 MPLS-LSR-MIB Constraints (continued)
MIB Object Notes