user manual

3-51
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
IGMP-MIB
IGMP-MIB
The IGMP-MIB contains objects to manage the Internet Group Management Protocol (IGMP) on the
router.
Table 3-37 ifTable Object Values for DS3 Channelized T1/E1 OSMs
OSM-12CT3-T1 DS3 Layer DS1 Layer
ifTable
IfDescr T3 slot/subslot/port
E3 slot/subslot/port
T1 slot/subslot/port
E1 slot/subslot/port
IfType ds3(30) ds1(18)
IfSpeed 44736000 (DS3)
34368000 (E3)
1544000 (DS1)
2048000 (E1)
IfPhysAddress The circuit ID value, or zero length
string.
The circuit ID value, or zero length
string.
IfName
T3 slot/subslot/port
E3 slot/subslot/port
T1 slot/subslot/port
E1 slot/subslot/port
IfLinkUpDownTrapEnable enabled(1) enabled(1)
IfHighSpeed 45 (DS3)
34 (E3)
2
IfConnectorPresent true(1) true(1)
Table 3-38 RFC1407-MIB Constraints
MIB Object Notes
dsx3ConfigTable
•
dsx3LineType Supported values is E3 supports e3other(6) and
e3Plcp(8)
• dsx3LineCoding Read-only.
T3 supports dsx3B3ZS(2) value only.
E3 supports e3HDB3(3) value only.
• dsx3SendCode Read-only. Supports dsx3SendNoCode value only.
• dsx3CircuitIdentifier Read-only.
• dsx3LoopbackConfig Read-only.
dsx3FarEndConfigTable
Not supported.
dsx3FarEndCurrentTable
Not supported.
dsx3FarEndIntervalTable
Not supported.
dsx3FarEndTotalTable
Not supported.
1 All T3/ATM line cards only support RO on all variables. See IF-MIB section for use of ifTable.
2 The RFC1407-MIB use supports the following port adapter line card types: PA-MC-T3, PA-MC-E3,
PA-A3-T3, PA-A3-E3.