user manual

3-5

Cisco 7304 Router MIB Specifications Guide

OL-4925-02

Chapter 3 MIB Specifications

BGP4-MIB

The BGP4-MIB (RFC 1657) provides access to information related to the implementation of the Border

Gateway Protocol (BGP). The MIB provides:

• BGP configuration information

• Information about BGP peers and messages exchanged with them

• Information about advertised networks

BRIDGE-MIB

The BRIDGE-MIB contains objects to manage Media Access Control (MAC) bridges between Local

Area Network (LAN) segments, as defined by the IEEE 802.1D-1990 standard. This MIB is extracted

from RFC 1493 and is intended for use with network management protocols in TCP/IP-based internets.

CISCO-AAA-SESSION-MIB

The CISCO-AAA-SESSION-MIB contains information about accounting sessions based on

authentication, authorization, and accounting (AAA) protocols.

CISCO-AAL5-MIB

The CISCO-AAL5-MIB contains performance statistics for ATM adaptation layer 5 (AAL5) virtual

channel connections (VCCs). This MIB provides statistics not found in the aal5VccTable in RFC 1695

(for example, packets and octets received and transmitted on the VCC).

There are no constraints on this MIB.

CISCO-ACCESS-ENVMON-MIB

The CISCO-ACCESS-ENVMON-MIB indicates the reason for a power supply failure, which is

information that is not provided in the ciscoEnvMonSupplyStatusTable in the CISCO-ENVMON-MIB.

The CISCO-ACCESS-ENVMON-MIB also defines temperature and voltage notifications to replace

those in CISCO-ENVMON-MIB.

CISCO-ALPS-MIB

The CISCO-ALPS-MIB provides Cisco airline protocol support for IBM-P1024B(ALC) and

Unisys-P1024C(UTS) protocol encapsulation over TCP/IP. The MIB contains configuration and

operational information for the protocol, which provides a tunneling mechanism to transport airline

protocol data across a Cisco router-based TCP/IP network to an X.25-attached mainframe.