user manual

3-49
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
HC-RMON-MIB
HC-RMON-MIB
The MIB module for managing remote monitoring device implementations. This MIB module augments
the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in
RFC 2021.
IEEE8021-PAE-MIB
The Port Access Entity module for managing IEEE 802.1X.
IEEE8023-LAG-MIB
The IEEE 8023-LAG-MIB is the Link Aggregation module for managing IEEE Standard 802.3ad.
IF-MIB
The IF-MIB (RFC 2233) describes the attributes of physical and logical interfaces. The router supports
the ifGeneralGroup of MIB objects for all layers (ifIndex, ifDescr, ifType, ifSpeed, ifPhysAddress,
ifAdminStatus, ifOperStatus, ifLastChange, ifName, ifLinkUpDownTrapEnable, ifHighSpeed, and
ifConnectorPresent).
MIB Constraints
Table 3-34 lists the constraints that the Cisco 7304 router places on objects in the IF-MIB. For detailed
definitions of MIB objects, see the MIB.
OSM ifTable Values
This section contains tables that list the ifTable values used for OSMs in the Cisco 7304 router.
Table 3-34 IF-MIB Constraints
MIB Object Notes
ifXTable
•
IfPromiscuousMode Read-only.
ifStackTable
•
IfStackStatus For creating and removing table entries, the only
supported values are createAndGo(4) and destroy(6).
ifRcvAddressTable
•
IfRcvAddressStatus For creating and removing table entries, the only
supported values are createAndGo(4) and destroy(6).
• IfRcvAddressType The only supported value is other(1).