user manual

3-32
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
CISCO-QLLC01-MIB
CISCO-QLLC01-MIB
The CISCO-QLLC01-MIB contains objects to configure and monitor logical connections for the
Qualified Logical Link Control (QLLC) protocol.
CISCO-QUEUE-MIB
The CISCO-QUEUE-MIB contains objects to manage interface queues, which can be used for FIFO,
priority, custom, and fair queuing.
CISCO-RF-MIB
The CISCO-RF-MIB contains objects related to the redundancy framework (RF), which is designed to
support the one-to-one redundancy of processor cards. Note that the MIB is not designed to support
redundant hardware, such as power supplies.
CISCO-RSRB-MIB
The CISCO-RSRB-MIB contains objects used to manage remote source-route bridging (RSRB) on the
router. This MIB provides information about the attributes of the local-remote RSRB peer relationship.
CISCO-RTTMON-MIB
The CISCO-RTTMON-MIB contains objects to monitor network performance. The MIB provides
information about the response times of network resources and applications. Each conceptual round-trip
time (RTT) control row in the MIB represents a single probe, which is used to determine an entity’s
response time. The probe defines an RTT operation to perform (for example, an FTP or HTTP get
request), and the results indicate whether the operation succeeded or failed, and the length of time it took
to complete.
If you plan to schedule an RTT operation, see Table 3-20 for information about
rttMonScheduleAdminRttStartTime in the rttMonScheduleAdminTable.
Note An rttMonCtrlOperConnectionLostOccurred trap is generated when an RTT connection cannot be
established to the destination router because the router responder application is not running. However,
the trap is not generated if the physical connection to the router is lost.