user manual

3-21
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
CISCO-ENTITY-FRU-CONTROL-MIB
Note The CISCO-ENTITY-EXT-MIB is only supported for the physical entities representing active and
standby processors.
CISCO-ENTITY-FRU-CONTROL-MIB
The CISCO-ENTITY-FRU-CONTROL-MIB contains objects to configure and monitor the status of
field replaceable units (FRUs) on the Cisco 7304 router. An FRU is a hardware component (such as a
line card) that can be replaced on site.
Table 3-15 lists the constraints that the router places on objects in the
CISCO-ENTITY-FRU-CONTROL-MIB. For detailed definitions of MIB objects, see the MIB.
Table 3-14 CISCO-ENTITY-EXT-MIB Object Constraints
MIB Object Notes
ceExtConfigRegTable
ceExtConfigRegNext Read only.
ceExtSysBootImageList Read only.
Table 3-15 CISCO-ENTITY-FRU-CONTROL-MIB Constraints
MIB Object Notes
cefcModuleTable
•
cefcModuleAdminStatus Supported values:
• Enable(1)
• Reset(3)
Note The cefcModuleAdminStatus object cannot be set
to reset(3) for processor modules.
Note When a line card is disabled, its
cefcModuleAdminStatus cannot be set to reset.
• cefcModuleOperStatus Supported values:
– Unknown(1)—Read-only.
– Ok(2)—Read-only.
– Failed(7)—Read-only.
• cefcModuleResetReason Supported values:
– Unknown(1)—Read-only.
– PowerUp(2)—Read-only.
– ManualReset(5)—Read-only.
cefcFRUPowerSupplyGroupTable
Not supported.
cefcFRUPowerStatusTable
Not supported.