user manual

3-11
Cisco 7304 Router MIB Specifications Guide
OL-4925-02
Chapter 3 MIB Specifications
CISCO-CLASS-BASED-QOS-MIB
MIB Constraints
Table 3-5 lists the constraints that the Cisco 7304 Network Service Engine (NSE) 100-based router
places on objects in the CISCO-CLASS-BASED-QOS-MIB. For detailed definitions of MIB objects, see
the MIB. Any MIB table or object not listed in this table is implemented as defined in the MIB.
Note The CISCO-CLASS-BASED-QOS-MIB support for the Cisco 7304 NPE-G100 and the Cisco c7200
NPE-G1 is the same.
Table 3-5 CISCO-CLASS-BASED-QOS-MIB Constraints for the c7304 NSE-100
MIB Object Notes
cbQosInterfacePolicyTable
•
cbQosInterfacePolicyIndex Not supported.
cbQosFrameRelayPolicyTable
•
cbQosFRPolicyIndex Not supported.
cbQosATMPVCPolicyTable
•
cbQosATMPolicyIndex Not supported.
cbQosQueueingCfgTable
•
cbQosQueueingCfgFlowEnabled· The QosQueueingCfgFlowEnabled is always false(2)
because the fair queue is not supported.
• cbQosQueueingCfgIndividualQSize· Not supported on the NSE-100.
• cbQosQueueingCfgDynamicQNumber· Not supported on the NSE-100.
• cbQosQueueingCfgPrioBurstSize Not supported on the NSE-100.
cbQosTSCfgTable
•
cbQosTSCfgBurstSize Not supported on the NSE-100.
• cbQosTSCfgExtBurstSize Not supported on the NSE-100.
• cbQosTSCfgAdaptiveEnabled Not supported on the NSE-100.
• cbQosTSCfgAdaptiveRate Not supported on the NSE-100.
• cbQosTSCfgLimitType average(1) is the only value supported on the
NSE-100 card.
cbQosQueueingStatsTable
•
cbQosQueueingCurrentQDepth· Not supported on the NSE-100.
• cbQosQueueingMaxQDepth Not supported on the NSE-100. Current value is
available in Parallel eXpress Forwarding (PXF).
cbQosTSStatsTable
• cbQosTSStatsDelayedByteOverflow· For the NSE-100s, the shaping stats,
cbQosTSStatsEntry, are not supported in PXF*. PXF
performs the traffic shaping according to the traffic
shaping configuration.
• cbQosTSStatsDelayedByte
• cbQosTSStatsDelayedByte64