user manual

All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Dual-Port Fast Ethernet Port Adapter (PA-2FE) Features
●
Dual-port Fast Ethernet/ISL 100BaseTX port adapter (copper) with RJ-45 connectors
●
Dual-port Fast Ethernet/ISL 100BaseFX port adapter (fiber) with SC connectors (TX and RX) supporting multimode 62.5/125-micron
fiber cables
●
PA-2FE-TX supports auto-negotiation between 10- and 100-Mbps
SPECIFICATIONS (PA-2FE)
Physical Specifications
●
Dimensions (H x W x D): 1.0 x 6.5 x 6.0 in.
●
Weight: 1 lb (0.45 kg)
Environmental Specifications
●
Operating temperature: 32° to 104°F (0° to 40°C)
●
Storage temperature: -4° to 149°F (-20° to 65°C)
●
Relative humidity: 10 to 90%, noncondensing
Power Requirements
●
Power consumption: 15 watts
●
Thermal dissipation: 51 Btu/hr
Maximum Station-to-Station Cabling Distance
●
100BaseTX, Category 5 UTP: 328 ft (100m)
●
100BaseFX, 62.5/125-micron multimode fiber:
●
400-m half duplex, 2-km full duplex
●
MII: dependent on customer-supplied transceiver
Network Connectors (per port/interface)
●
100BaseTX: RJ-45 (female), standard 8-wire
●
100BaseFX: SC (female)
●
MII per IEC/SC 48B (sec) 276 [22-1]
Optical Power Parameters
●
Transmit output power: -20 to -14 dBm
●
Receiver sensitivity: -31 to -14 dBm
●
Optical source: Class 1 LED
●
Maximum span: 2 km
●
Wavelength: 1300 nanometers