user manual

25-8
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 25 Video on Demand
Procedures
Stage an EPG to DMP Local Storage
Procedure
Step 1 Click Network and Endpoints on the Home page.
Step 2 Choose Digital Media Players > Advanced Tasks.
Step 3 Click Deployment Package in the Application Types list.
Step 4 Click Add New Application above the Applications table.
Step 5 Click Cast in the Applications list.
Step 6 Enter Deploy-Local-Cast in the Name field.
Step 7 Choose an option from the Mount Point list.
Step 8 Click the name of your Cisco Cast program guide. Then, click Select Application.
Step 9 Click Submit.
Step 10 Stop. You have completed this procedure.
• Should “usb_1”
1
be the local
mount point?
1. “usb_1” is the CF, SD, or SSD memory card inside your DMP.
When you will use usb_1
a. Choose Flash Storage (default).
• Should “usb_2”
2
be the local
mount point?
2. “usb_2” is an external hard drive or flash drive that you have attached to your DMP.
When you will use usb_2
a. Choose USB.