user manual

15-21
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 15 Touchscreens, Projectors, and Displays
Procedures
Step 3 Click System Tasks in the Application Types list.
Step 4 Find your editing target in the Applications table.
Step 5 Click its named row in the Applications table.
Step 6 Click Delete Application.
Step 7 Click Submit to commit this deletion.
OR
Click Cancel to abandon this deletion.
Step 8 Stop. You have completed this procedure.
Related Topics
• RS-232 Commands to Manage Cisco LCD Displays
DVI
Support DVI Management
• Prepare a 40- or 52-inch Cisco LCD to Support Centralized Management through DVI, page 15-21
Prepare a 40- or 52-inch Cisco LCD to Support Centralized Management through DVI
Note Only our 40-inch and 52-inch LCD display models support DVI connections.
When you use an HDMI cable or a DVI cable to connect your DMP to a 40- or 52-inch Cisco LCD
display, you can use Digital Signs to centrally manage the LCD display.
When unmodified HDMI is the connection type from a DMP to either of these display models,
centralized management from DMM works immediately, without any prerequisites. However, when you
combine HDMI with a DVI adapter, you must complete a simple task at the physical installation site
for your display before you can start to centrally manage it.
Before You Begin
• Activate RS-232 command access for your 40-inch or 52-inch display.