user manual

11-2
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 11 Network and Endpoints Overview
Procedures
Procedures
• View Network and Endpoint Options in DMM, page 11-2
View Network and Endpoint Options in DMM
Procedure
Step 1 Point a supported browser at your DMM appliance.
• When you use HTTP, be sure to specify port 8080.
• When you use HTTPS, be sure to specify port 8443.
• Always use the fully qualified device name (FQDN), not the IP address.
For example, https://dmm.example.com:8443
Step 2 Click Network and Endpoints.
Step 3 Stop. You have completed this procedure.
Tip Check Release Notes for Cisco Digital Media Suite 5.4.x on Cisco.com for a list of supported browsers.