user manual

10-6
User Guide for Cisco Digital Media Manager 5.4.x
OL-15762-05
Chapter 10 SNMP, Events, and Notifications
Procedures
Configure SNMP Server Settings for Your DMM Appliance
Cisco DMS can convey its notifications to an external SNMP server.
Before You Begin
• Log in to DMM.
Procedure
Step 1 Click Administration.
Step 2 Choose Settings > SNMP.
Step 3 Click the Server Status radio button to enable or disable SNMP monitoring.
Step 4 Enter in the Host field the routable IP address or DNS-resolvable hostname of your NMS.
Step 5 Enter in the Port field the numeric UDP port assignment reserved for SNMP traffic.
Step 6 Apply the community string.
Step 7 Enter in the Community String field the password to identify that community.
Tip The default Community String value is public.
Step 8
Click Save.
Step 9 Stop. You have completed this procedure.
Populate the MIB Browser in Your NMS
Procedure
Step 1 Log in to your Cisco.com account on ftp.cisco.com.
Step 2 Navigate to .
Timesaver Alternatively, go to http://cisco.com/go/dms/mib.
Step 3
Download these files:
Step 4 Load both files into your network management system (NMS).