user manual

4-11
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
78-11380-10
Chapter 4 Getting Started with CMS
Displaying CMS
The switch home page appears, as shown in Figure 4-4.
Figure 4-4 Switch Home Page
The switch home page has these tabs:
• Express Setup—Opens the Express Setup page
Note You can use Express Setup to assign an IP address to an unconfigured switch. For more
information, refer to the hardware installation guide.
• Cluster Management Suite—Launches CMS
• Tools—Accesses diagnostic and monitoring tools, such as Telnet, Extended Ping, and the show
interfaces privileged
EXEC command
• Help Resources—Provides links to the Cisco website, technical documentation, and the Cisco
Technical Assistance Center (TAC)
Step 3 Click Cluster Management Suite to launch the CMS interface. The CMS Startup Report runs and
verifies that your PC or workstation can correctly run CMS.