user manual

5-1

Cisco Router and Security Device Manager 2.5 User’s Guide

OL-4015-12

CHAPTER

Configuring WAN Connections

The WAN wizards enable you to configure WAN connections for all Cisco

SDM-supported interfaces.

This chapter contains the following sections:

• Configuring an Ethernet WAN Connection

• Configuring a Serial Connection

• Configuring a DSL Connection

• Configuring an ISDN Connection

• Configuring an Aux Backup Connection

• Configuring an Analog Modem Connection

• Configuring a Cable Modem Connection

Configuring an Ethernet WAN Connection

Complete these steps to configure an Ethernet WAN Connection:

Step 1 If you want to review the IOS CLI commands that you send to the router when

you complete the configuration, go to the Cisco SDM toolbar, and click Edit >

Preferences > Preview commands before delivering to router.

Step 2 In the Cisco SDM toolbar, click Configure.

Step 3 In the Cisco SDM taskbar, click Interfaces and Connections.