user manual

Chapter 31 Router Properties
vty Settings
31-18
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Permitted Protocols
This column lists the protocols that the specified hosts can use when
communicating with the router. The following protocols can be configured:
• Cisco SDM—Specified hosts can use Cisco SDM.
• Telnet—Specified hosts can use Telnet to access the router CLI.
• SSH—Specified hosts can use Secure Shell to access the router CLI.
• HTTP—Specified hosts can use Hypertext Transfer Protocol to access the
router. If Cisco SDM is specified, either HTTP or HTTPS must also be
specified.
• HTTPS—Specified hosts can use Hypertext Transfer Protocol Secure to
access the router.
• RCP—Specified hosts can use Remote Copy Protocol to manage files on the
router.
• SNMP—Specified hosts can use Simple Network Management Protocol to
manage the router.
Add Button
Click to add a management policy, and specify the policy in the Add a
Management Policy window.
Edit Button
Click to edit a management policy, and specify the policy in the Edit a
Management Policy window.
Delete Button
Click to delete a specified management policy.
Apply Button
Click to apply changes you made in the Add or Edit a Management Policy window
to the router configuration.