user manual

Chapter 21 Cisco IOS SSL VPN
Editing SSL VPN Connections
21-38
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Click a gateway to view details about it in the lower part of the window. Enable a
gateway that is Disabled by choosing it and clicking Enable. Take an enabled
gateway out of service by choosing it and clicking Disable. To edit a gateway,
select the gateway and click the Edit button. To remove a gateway, choose the
gateway and click the Delete button.
Details of SSL VPN Gateway
This area of the window displays configuration details about the gateway selected
in the upper part of the window, and the names of the Cisco IOS SSL VPN
contexts that are configured to use this gateway.
For more information on gateway configuration details, click Add or Edit a SSL
VPN Gateway. For more information on contexts, click SSL VPN Context.
Add or Edit a SSL VPN Gateway
Create or edit a Cisco IOS SSL VPN gateway in this window.
Gateway Name
The gateway name uniquely identifies this gateway on the router, and is the name
used to refer to the gateway when configuring Cisco IOS SSL VPN contexts.
IP Address
Choose or enter the IP address that the gateway is to use. This must be a public IP
address, and cannot be an address used by another gateway on the router.
Digital Certificate
Choose the certificate that is to be sent to Cisco IOS SSL VPN clients for SSL
authentication.
HTTP Redirect Checkbox
Uncheck if you do not want HTTP redirect to be used. HTTP redirect
automatically redirects HTTP requests to port 443, the port used for secure
Cisco IOS SSL VPN communication.