user manual

13-9
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter 13 Easy VPN Server
Creating an Easy VPN Server Connection
Group Authorization: User Group Policies
This window allows you to add, edit, clone or delete user group policies on the
local database.
Field Reference
Table 13-7 describes the fields in this screen.
Table 13-7 User Group Policies Fields
Element Description
Group Policy List area
Select Check the box in this column next to the groups that you want this
Easy VPN server connection to serve.
Group Name Name given to the user group.
Pool Name of the IP address pool from which an IP address is assigned
to a user connecting from this group.
DNS Domain Name System (DNS) address of the group.
This DNS address is “pushed” to the users connecting to this group.
WINS Windows Internet Naming Service (WINS) address of the group.
This WINS address is “pushed” to the users connecting to this
group.
Domain Name Domain name of the group.
This domain name is “pushed” to the users connecting to this group.
Split ACL The access control list (ACL) that represents protected subnets for
split tunneling purposes.
Configure Idle Timer
Idle Timer Click the Configure Idle Timer check box and enter a value for the
maximum time that a VPN tunnel can remain idle before being
disconnected. Enter hours in the left field, minutes in the middle
field, and seconds in the right field. The minimum time allowed is
1 minute.
Disconnecting idle VPN tunnels can help the Easy VPN Server run
more efficiently by reclaiming unused resources.