user manual

1-16
Cisco 1900 Series Hardware Installation
OL-19084-02
Chapter 1 Overview of the Router
Specifications
Safety compliance UL 60950-1
CAN/CSA C22.2 No. 60950-1
EN 60950-1
AS/NZS 60950-1
IEC 60950-1
For detailed compliance information, see Regulatory Compliance
and Safety Information for Cisco 1900 Series Routers.
Telecom TIA/EIA/IS-968
CS-03
ANSI T1.101
IEEE 802.3
RTTE Directive
For detailed compliance information, see Regulatory Compliance
and Safety Information for Cisco 1900 Series Routers.
1. Refer to the Cisco 1900 Series Integrated Services Routers Data Sheet for additional information.
2. Rack unit (RU
3. 480 Mb/s individually, bandwidth is shared when both are used.
4. Auto-MDIX=auto media-dependent interface cross over.
Table 1-7 Cisco 1905 and 1921 Series Router Specifications
1
Description Specification
Ta b l e 1-8 Cisco 1940 Series Router Specifications
1
Description Specification
Physical
Dimensions without rubber feet
(H x W x D)
3.5 x 13.5 x 11.5 in. (8.9 x 34.3 x 29.2 cm), 2 RU
2
height
Rack-mount 19 in. (48.3 cm)
EIA
Included
Weight (no modules installed) Approximately 12 lbs
Weight with PoE 12.8 lbs
Maximum Weight-Fully
Configured
14.0 lbs
Power
AC input power
• Input voltage 100 to 240 VAC, autoranging
• Frequency 47 to 63 Hz
• Input current (max) 1.5 to 0.6 A
• Typical power (no modules) 35 W
• Power (max) with AC 110 W
• Power (max) with PoE
(platform only)
110 W