user manual
Table Of Contents
- Cisco ONS 15454 SDH Reference Manual
- Contents
- About this Guide
- Shelf and FMEC Hardware
- Common Control Cards
- Electrical Cards
- Optical Cards
- Ethernet Cards
- Storage Access Networking Cards
- Card Protection
- Cisco Transport Controller Operation
- Security and Timing
- Circuits and Tunnels
- SDH Topologies and Upgrades
- CTC Network Connectivity
- Alarm Monitoring and Management
- Ethernet Operation
- Hardware Specifications
- A.1 Shelf Specifications
- A.2 SFP Specifications
- A.3 General Card Specifications
- A.4 Common Control Card Specifications
- A.5 Electrical Card and FMEC Specifications
- A.5.1 E1-N-14 Card Specifications
- A.5.2 E1-42 Card Specifications
- A.5.3 E3-12 Card Specifications
- A.5.4 DS3i-N-12 Card Specifications
- A.5.5 STM1E-12 Card Specifications
- A.5.6 BLANK Card
- A.5.7 FMEC-E1 Specifications
- A.5.8 FMEC-DS1/E1 Card Specifications
- A.5.9 FMEC E1-120NP Card Specifications
- A.5.10 FMEC E1-120PROA Card Specifications
- A.5.11 FMEC E1-120PROB Card Specifications
- A.5.12 E1-75/120 Impedance Conversion Panel Specifications
- A.5.13 FMEC-E3/DS3 Card Specifications
- A.5.14 FMEC STM1E 1:1 Card Specifications
- A.5.15 FMEC-BLANK Card Specifications
- A.5.16 MIC-A/P Card Specifications
- A.5.17 MIC-C/T/P Card Specifications
- A.6 Optical Card Specifications
- A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
- A.6.2 OC3 IR/STM1 SH 1310-8 Card Specifications
- A.6.3 OC12 IR/STM4 SH 1310 Card Specifications
- A.6.4 OC12 LR/STM4 LH 1310 Card Specifications
- A.6.5 OC12 LR/STM4 LH 1550 Card Specifications
- A.6.6 OC12 IR/STM4 SH 1310-4 Card Specifications
- A.6.7 OC48 IR/STM16 SH AS 1310 Card Specifications
- A.6.8 OC48 LR/STM16 LH AS 1550 Card Specifications
- A.6.9 OC48 ELR/STM16 EH 100 GHz Card Specifications
- A.6.10 OC192 SR/STM64 IO 1310 Card Specifications
- A.6.11 OC192 IR/STM64 SH 1550 Card Specifications
- A.6.12 OC192 LR/STM64 LH 1550 Card Specifications
- A.6.13 OC192 LR/STM64 LH ITU 15xx.xx Card Specifications
- A.7 Ethernet Card Specifications
- A.8 Storage Access Networking Card Specifications
- Administrative and Service States
- Network Element Defaults
- Index
2-2
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Chapter 2 Common Control Cards
2.1.2 Card Compatibility
2.1.2 Card Compatibility
Table 2-2 lists the Cisco Transport Controller (CTC) software release compatibility for each
common-control card. In the tables below, “Yes” means cards are compatible with the listed software
versions. Table cells with dashes mean cards are not compatible with the listed software versions.
Table 2-1 Common Control Cards for the ONS 15454 SDH
Card Description
For Additional
Information...
TCC2
The Advanced Timing, Communications, and Control
(TCC2) card is the main processing center of the
ONS 15454 SDH and provides system initialization,
provisioning, alarm reporting, maintenance, and
diagnostics.
See the “2.2 TCC2 Card”
section on page 2-4.
TCC2P
The Advanced Timing, Communications, and Control
Plus (TCC2P) card is the main processing center of the
ONS 15454 SDH and provides system initialization,
provisioning, alarm reporting, maintenance, and
diagnostics. This card also has Ethernet security
features.
See the “2.3 TCC2P Card”
section on page 2-7.
XC10G
The 10 Gigabit Cross Connect (XC10G) card is the
central element for switching; it establishes
connections and performs time-division switching
(TDS).
See the “2.4 XC10G
Card” section on
page 2-10.
XC-VXL-10G
The International Cross Connect 10 Gigabit AU3/AU4
High-Capacity Tributary (XC-VXL-10G) card is the
central element for switching; it establishes
connections and performs TDS. It supports cards with
speeds up to 10 Gbps.
See the
“2.5 XC-VXL-10G Card”
section on page 2-12.
XC-VXL-2.5G
The International Cross Connect 2.5 Gigabit AU3/AU4
High-Capacity Tributary (XC-VXL-2.5G) card is the
central element for switching; it establishes
connections and performs TDS. It supports cards with
speeds up to 2.5 Gbps.
See the
“2.6 XC-VXL-2.5G Card”
section on page 2-14.
AIC-I
The Alarm Interface Controller–International (AIC-I)
card provides customer-defined alarm input/output
(I/O), supports user data, and supports local and
express orderwire.
See the “2.7 AIC-I Card”
section on page 2-16.
Table 2-2 Common-Control Card Software Release Compatibility
Card R4.0 R4.1 R4.5 R4.6 R4.7 R5.0
TCC2
Yes Yes Yes Yes Yes Yes
TCC2P
Yes Yes Yes Yes Yes Yes