user manual
Table Of Contents
- Cisco ONS 15454 SDH Reference Manual
- Contents
- About this Guide
- Shelf and FMEC Hardware
- Common Control Cards
- Electrical Cards
- Optical Cards
- Ethernet Cards
- Storage Access Networking Cards
- Card Protection
- Cisco Transport Controller Operation
- Security and Timing
- Circuits and Tunnels
- SDH Topologies and Upgrades
- CTC Network Connectivity
- Alarm Monitoring and Management
- Ethernet Operation
- Hardware Specifications
- A.1 Shelf Specifications
- A.2 SFP Specifications
- A.3 General Card Specifications
- A.4 Common Control Card Specifications
- A.5 Electrical Card and FMEC Specifications
- A.5.1 E1-N-14 Card Specifications
- A.5.2 E1-42 Card Specifications
- A.5.3 E3-12 Card Specifications
- A.5.4 DS3i-N-12 Card Specifications
- A.5.5 STM1E-12 Card Specifications
- A.5.6 BLANK Card
- A.5.7 FMEC-E1 Specifications
- A.5.8 FMEC-DS1/E1 Card Specifications
- A.5.9 FMEC E1-120NP Card Specifications
- A.5.10 FMEC E1-120PROA Card Specifications
- A.5.11 FMEC E1-120PROB Card Specifications
- A.5.12 E1-75/120 Impedance Conversion Panel Specifications
- A.5.13 FMEC-E3/DS3 Card Specifications
- A.5.14 FMEC STM1E 1:1 Card Specifications
- A.5.15 FMEC-BLANK Card Specifications
- A.5.16 MIC-A/P Card Specifications
- A.5.17 MIC-C/T/P Card Specifications
- A.6 Optical Card Specifications
- A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
- A.6.2 OC3 IR/STM1 SH 1310-8 Card Specifications
- A.6.3 OC12 IR/STM4 SH 1310 Card Specifications
- A.6.4 OC12 LR/STM4 LH 1310 Card Specifications
- A.6.5 OC12 LR/STM4 LH 1550 Card Specifications
- A.6.6 OC12 IR/STM4 SH 1310-4 Card Specifications
- A.6.7 OC48 IR/STM16 SH AS 1310 Card Specifications
- A.6.8 OC48 LR/STM16 LH AS 1550 Card Specifications
- A.6.9 OC48 ELR/STM16 EH 100 GHz Card Specifications
- A.6.10 OC192 SR/STM64 IO 1310 Card Specifications
- A.6.11 OC192 IR/STM64 SH 1550 Card Specifications
- A.6.12 OC192 LR/STM64 LH 1550 Card Specifications
- A.6.13 OC192 LR/STM64 LH ITU 15xx.xx Card Specifications
- A.7 Ethernet Card Specifications
- A.8 Storage Access Networking Card Specifications
- Administrative and Service States
- Network Element Defaults
- Index

B-2
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Appendix B Administrative and Service States
B.2 Administrative States
B.2 Administrative States
Administrative states are used to manage service states. Administrative states consist of a PST and an
SST. Table B-3 lists the administrative states supported by the ONS 15454 SDH. See Table B-2 for SST
definitions.
Note A change in the administrative state of an entity does not change the service state of supporting or
supported entities.
loopback The entity is in loopback mode.
mismatchOfEquipment An improper card is installed, a cross-connect card does not support an
installed card, or an incompatible backplane is installed. For example, an
installed card is not compatible with the card preprovisioning or the slot. This
SST applies only to cards.
maintenance The entity has been manually removed from service for a maintenance activity
but still performs its provisioned functions. Alarm reporting is suppressed, but
traffic is carried. Raised fault conditions, whether or not their alarms are
reported, can be retrieved on the CTC Conditions tab or by using the TL1
RTRV-COND command.
outOfGroup The virtual concatenation (VCAT) member cross-connect is not used to carry
VCAT group traffic. This state is used to put a member circuit out of the group
and to stop sending traffic. Locked-enabled,outOfGroup only applies to the
cross-connects on an end node where VCAT resides. The cross-connects on
intermediate nodes are in the Locked-enabled,maintenance service state.
softwareDownload The card is involved in a software download. This SST applies only to cards.
unassigned The card is not provisioned in the database. This SST applies only to cards.
notInstalled The card is not physically present (that is, an empty slot). This SST applies
only to cards.
Table B-2 ONS 15454 SDH Secondary States (continued)
Secondary State Definition
Table B-3 ONS 15454 SDH Administrative States
Administrative State (PST,SST) Definition
Unlocked Puts the entity in service.
Unlocked,automaticInservice Puts the entity in automatic in-service.
Locked,disabled Removes the entity from service and disables it.
Locked,maintenance Removes the entity from service for maintenance.
Locked,outOfGroup (VCAT circuits only.) Removes a VCAT member cross-connect
from service and from the group of members.