user manual

8-14
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
Chapter 8 Cisco Transport Controller Operation
8.5.3 Card View
Note For TXP, MXP and DWDM card information, refer to the Cisco ONS 15454 DWDM Installation and
Operations Guide.
Table 8-12 Card View Tabs and Subtabs
Tab Description Subtabs
Alarms Lists current alarms (CR, MJ, MN) for the card
and updates them in real time.
—
Conditions Displays a list of standing conditions on the
card.
—
History Provides a history of card alarms including
date, object, port, and severity of each alarm.
Session (displays alarms and events
for the current session), Card
(displays alarms and events retrieved
from a fixed-size log on the card)
Circuits Creates, deletes, edits, and searches for
circuits.
Circuits
Provisioning Provisions an ONS 15454 SDH card. DS-N and STM cards: Line, Line
Thresholds (different threshold
options are available for electrical
and optical cards), Elect Path
Thresholds, SDH Thresholds, VC4,
and Alarm Profiles
TXP and MXP cards: Card, Line,
Line Thresholds (different threshold
options are available for electrical
and optical cards), Optics
Thresholds, OTN, and Alarm Profiles
DWDM cards (subtabs depend on the
card type): Optical Line, Optical
Chn, Optical Amplifier, Parameters,
Optics Thresholds
Maintenance Performs maintenance tasks for the card. Loopback, Info, Protection, and J1
Path Trace (options depend on the
card type)
Performance Performs performance monitoring for the card. DS-N and STM cards: no subtabs
TXP and MXP cards: Optics PM,
Payload PM, OTN PM
DWDM cards (subtabs depend on
card type): Optical Line, Optical
Chn, Optical Amplifier, Parameters,
Optics Thresholds, OTN
Inventory Displays an Inventory screen of the ports (TXP
and MXP cards only).
—