user manual
Table Of Contents
- Cisco ONS 15454 SDH Reference Manual
- Contents
- About this Guide
- Shelf and FMEC Hardware
- Common Control Cards
- Electrical Cards
- Optical Cards
- Ethernet Cards
- Storage Access Networking Cards
- Card Protection
- Cisco Transport Controller Operation
- Security and Timing
- Circuits and Tunnels
- SDH Topologies and Upgrades
- CTC Network Connectivity
- Alarm Monitoring and Management
- Ethernet Operation
- Hardware Specifications
- A.1 Shelf Specifications
- A.2 SFP Specifications
- A.3 General Card Specifications
- A.4 Common Control Card Specifications
- A.5 Electrical Card and FMEC Specifications
- A.5.1 E1-N-14 Card Specifications
- A.5.2 E1-42 Card Specifications
- A.5.3 E3-12 Card Specifications
- A.5.4 DS3i-N-12 Card Specifications
- A.5.5 STM1E-12 Card Specifications
- A.5.6 BLANK Card
- A.5.7 FMEC-E1 Specifications
- A.5.8 FMEC-DS1/E1 Card Specifications
- A.5.9 FMEC E1-120NP Card Specifications
- A.5.10 FMEC E1-120PROA Card Specifications
- A.5.11 FMEC E1-120PROB Card Specifications
- A.5.12 E1-75/120 Impedance Conversion Panel Specifications
- A.5.13 FMEC-E3/DS3 Card Specifications
- A.5.14 FMEC STM1E 1:1 Card Specifications
- A.5.15 FMEC-BLANK Card Specifications
- A.5.16 MIC-A/P Card Specifications
- A.5.17 MIC-C/T/P Card Specifications
- A.6 Optical Card Specifications
- A.6.1 OC3 IR 4/STM1 SH 1310 Card Specifications
- A.6.2 OC3 IR/STM1 SH 1310-8 Card Specifications
- A.6.3 OC12 IR/STM4 SH 1310 Card Specifications
- A.6.4 OC12 LR/STM4 LH 1310 Card Specifications
- A.6.5 OC12 LR/STM4 LH 1550 Card Specifications
- A.6.6 OC12 IR/STM4 SH 1310-4 Card Specifications
- A.6.7 OC48 IR/STM16 SH AS 1310 Card Specifications
- A.6.8 OC48 LR/STM16 LH AS 1550 Card Specifications
- A.6.9 OC48 ELR/STM16 EH 100 GHz Card Specifications
- A.6.10 OC192 SR/STM64 IO 1310 Card Specifications
- A.6.11 OC192 IR/STM64 SH 1550 Card Specifications
- A.6.12 OC192 LR/STM64 LH 1550 Card Specifications
- A.6.13 OC192 LR/STM64 LH ITU 15xx.xx Card Specifications
- A.7 Ethernet Card Specifications
- A.8 Storage Access Networking Card Specifications
- Administrative and Service States
- Network Element Defaults
- Index
CHAPTER
8-1
Cisco ONS 15454 SDH Reference Manual, R5.0
April 2008
8
Cisco Transport Controller Operation
This chapter describes Cisco Transport Controller (CTC), the Cisco software interface for the Cisco
ONS 15454 SDH. For CTC set up and login information, refer to the Cisco ONS 15454 SDH Procedure
Guide.
Chapter topics include:
• 8.1 CTC Software Delivery Methods, page 8-1
• 8.2 CTC Installation Overview, page 8-3
• 8.3 PC and UNIX Workstation Requirements, page 8-3
• 8.4 ONS 15454 SDH Connection, page 8-5
• 8.5 CTC Window, page 8-6
• 8.6 TCC2/TCC2P Card Reset, page 8-15
• 8.7 TCC2/TCC2P Card Database, page 8-15
• 8.8 Software Revert, page 8-15
8.1 CTC Software Delivery Methods
ONS 15454 SDH provisioning and administration is performed using the CTC software. CTC is a Java
application that is installed in two locations;CTC is stored on the Advanced Timing, Communications,
and Control (TCC2) card or the Advanced Timing, Communications, and Control Plus (TCC2P) card,
and it is downloaded to your workstation the first time you log into the ONS 15454 SDH with a new
software release.
8.1.1 CTC Software Installed on the TCC2/TCC2P Card
CTC software is preloaded on the ONS 15454 SDH TCC2/TCC2P card; therefore, you do not need to
install software on the TCC2/TCC2P cards. When a new CTC software version is released, use the
release-specific software upgrade guide to upgrade the ONS 15454 SDH software on the TCC2/TCC2P
cards.
When you upgrade CTC software, the TCC2/TCC2P cards store the new CTC version as the protect CTC
version. When you activate the new CTC software, the TCC2/TCC2P cards store the older CTC version
as the protect CTC version, and the newer CTC release becomes the working version. You can view the
software versions that are installed on an ONS 15454 SDH by selecting the Maintenance > Software tabs
in node view (Figure 8-1).