user manual

14-15
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Chapter 14 Routing
BGP Configuration
Step 1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the
BGP Configuration Window” section on page 14-4 for further details. Click on
the Network tab.
Step 2 Choose the chassis, for which you want to configure the BGP path, from the left
side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you
to launch the BGP Network Configuration window for the selected
chassis.
Step 3 Click Add/Remove Network. The BGP Network Configuration window appears.
Figure 14-6 BGP Network Configuration Window