User manual

Contents
xvii
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Configuration Examples for Link Noise Monitoring 19-4
Example of LNM Configuration on a Line Card 19-4
Example of LNM Configuration on a Shared Port Adapter 19-5
Example of a Syslog Message 19-5
Verification Example for Link Noise Monitoring 19-5
CHAPTER 20 Configuring L2 Virtual Private Networks 20-1
Feature History for L2VPN 20-3
Supported L2VPN Transport Types 20-3
Prerequisites for L2VPN: AToM 20-4
Supported Line Cards 20-4
Restrictions for L2VPN 20-5
Standards and RFCs 20-5
MIBs 20-6
NSF and SSO—L2VPN 20-6
Checkpointing AToM Information 20-7
Checkpointing Troubleshooting Tips 20-7
Prerequisites for NSF/SSO - L2VPN 20-7
Neighbor Routers in the MPLS HA Environment 20-7
Stateful Switchover 20-7
Nonstop Forwarding for Routing Protocols 20-8
Restrictions for NSF/SSO - L2VPN 20-8
Configuring NSF/SSO - L2VPN 20-8
Configuration Examples of NSF/SSO—Layer 2 VPN 20-9
L2VPN Local Switching—HDLC/PPP 20-10
Prerequisites of L2VPN Local Switching—HDLC/PPP 20-10
Restrictions of L2VPN Local Switching—HDLC/PPP 20-10
PPP Like-to-Like Local Switching 20-10
HDLC Like-to-Like Local Switching 20-11
Configuration Tasks and Examples 20-11
Configuration Tasks for L2VPN 20-12
Setting Up the Pseudowire—AToM Circuit 20-12
Configuring ATM AAL5 SDU Support over MPLS 20-14
Verifying ATM AAL5 SDU Support over MPLS 20-14
Configuring ATM-to-ATM PVC Local Switching 20-14
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS 20-15
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS on PVCs 20-16
Configuring OAM Cell Emulation for ATM AAL5 SDU Support over MPLS in VC Class
Configuration Mode 20-18