user manual

Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-330
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
DLSw+ RSVP Bandwidth Reservation Feature with Border Peers Configuration
Example
Figure 143 shows a DLSw+ border peer network configured with DLSw+ RSVP.
Figure 143 DLSw+ RSVP Bandwidth Reservation Feature in a Border Peer Network
The following example configures DLSWRTR1 to send PATH messages at rates of 40 kbps and 10 kbps
and DLSWRTR2 to send PATH messages at rates of 10.
DLSWRTR1
dlsw local-peer peer-id 10.2.17.1 group 1 promiscuous
dlsw rsvp default
dlsw remote-peer 0 tcp 10.3.15.2
dlsw peer-on-demand-defaults rsvp 40 10
IPRTR1
dlsw local-peer peer-id 10.3.15.2 group 1 border promiscuous
dlsw remote-peer 0 tcp 10.3.16.2
IPRTR2
dlsw local-peer peer-id 10.3.16.2 group 2 border promiscuous
dlsw remote-peer 0 tcp 10.3.15.2
DLSWRTR2
dlsw local-peer peer-id 10.14.25.2 group 2 promiscuous
dlsw rsvp default
dlsw remote-peer 0 tcp 10.3.16.2
The following output of the show ip rsvp sender command on DLSWRTR2 verifies that PATH messages
are being sent from DLSWRTR2:
DLSWRT2#show ip rsvp sender
To From Pro DPort Sport Prev Hop I/F BPS Bytes
10.2.17.1 10.14.25.2 TCP 2065 11003 10K 28K
10.14.25.2 10.2.17.1 TCP 11003 2065 10.2.17.1 Et1/1 10K 28K
The following output of the show ip rsvp request command on DLSWRTR2 verifies that RESV
messages are being sent from DLSWRTR 2:
DLSWRT2#show ip rsvp req
To From Pro DPort Sport Next Hop I/F Fi Serv BPS Bytes
10.14.25.2 10.2.17.1 TCP 11003 2065 10.2.17.1 Et1/1 FF RATE 10K 28K
DLSW RTR 1
10.2.17.1
IP RTR 1 IP RTR 2 DLSW RTR 2
10.3.15.2
10.3.16.2
Workstation 1
10.14.25.2
Workstation 2
51974
Group 1 Group 2
Token
Ring
Token
Ring