user manual

Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-329
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
DLSW+ RSVP Bandwidth Reservation Feature Configuration Example
Figure 142 shows a DLSw+ network with the DLSw+ RSVP Bandwidth Reservation feature configured.
Figure 142 DLSw+ RSVP Bandwidth Reservation Feature Configured
DLSWRTR 1 and DLSWRTR 2 are configured for the DLSw+ RSVP Bandwidth Reservation feature
with an average bit rate of 40 and a maximum-burst rate of 10.
DLSWRTR 1
dlsw local-peer peer id 10.2.17.1
dlsw remote-peer 0 tcp 10.2.24.3
dlsw rsvp 40 10
DLSWRTR2
dlsw local-peer peer id 10.2.24.3
dlsw remote-peer 0 tcp 10.2.17.1
dlsw rsvp 40 10
The following output of the show ip rsvp sender command on the DLSWRTR2 verifies that PATH
messages are being sent from DLSWRTR2:
DLSWRTR2#show ip rsvp sender
To From Pro DPort Sport Prev Hop I/F BPS Bytes
10.2.17.1 10.2.24.3 TCP 2065 11003 10K 28K
10.2.24.3 10.2.17.1 TCP 11003 2065 10.2.17.1 Et1/1 10K 28K
The following output of the show ip rsvp req command on the DLSWRTR2 verifies that RESV
messages are being sent from DLSWRTR2:
DLSWRTR2#show ip rsvp req
To From Pro DPort Sport Next Hop I/F Fi Serv BPS Bytes
10.2.24.3 10.2.17.1 TCP 11003 2065 10.2.17.1 Et1/1 FF RATE 10K 28K
If the IP cloud is able to guarantee the bandwidth requested and the show ip rsvp sender and show ip
rsvp req commands are successful, issue the show ip rsvp res command to verify that a reservation was
made from DLSWRTR1 to DLSWRTR2:
DLSWRTR2#show ip rsvp rese
To From Pro DPort Sport Next Hop I/F Fi Serv BPS Bytes
10.2.17.1 10.2.24.3 TCP 2065 11003 10.2.17.1 Et1/1 FF RATE 10K 28K
10.2.24.3 10.2.17.1 TCP 11003 2065 FF RATE 10K 28K
Workstation 3
DLSW RTR 1
10.2.17.1
IP RTR 1 IP RTR 2 DLSW RTR 2
10.1.15.2
10.1.16.2
Workstation 4
W
orkstation 1
10.2.24.3
Workstation
2
51973
Token
Ring