user manual

Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-328
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
DLSw+ Peer Cluster Feature Configuration Example
Figure 141 shows a DLSw+ network configured with the DLSw+ Peer Clusters feature.
Figure 141 DLSw+ Peer Cluster Feature
Because BP2 is configured as the border peer with the DLSw+ Peer Clusters feature, it does not forward
explorers to both MPA and MPB since they are part of the same peer cluster.
BP2
source-bridge ring-group 310
dlsw local-peer 10.1.1.3 border group 2 promiscuous
MPA
source-bridge ring-group 310
dlsw local-peer 10.1.1.1 group 2 promiscuous cluster 5
dlsw remote-peer 0 tcp 10.1.1.3
MPB
source-bridge ring-group 310
dlsw local-peer 10.1.1.2 group 2 promiscuous cluster 5
dlsw remote-peer tcp 0 10.1.1.3
MPC
dlsw local-peer 10.1.1.4 group 2 promiscuous
dlsw remote-peer tcp 0 10.1.1.3
BP2
Peer cluster
ID 5
MPA
X
Y
MPB
BP1
Peer group 1 Peer group 2
17268
Token
Ring