user manual

Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-319
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
clockrate 19200
sdlc role primary
sdlc vmac 4000.1234.5600
sdlc address C1
sdlc xid C1 05DCCCC1
sdlc partner 4001.3745.1088 C1
sdlc address C2 xid-poll
sdlc partner 4001.3745.1088 C2
sdlc dlsw C1 C2
In the following example, all devices are type PU 2.1 (Method 1):
interface serial 2
mtu 4400
no ip address
encapsulation sdlc
no keepalive
clockrate 19200
sdlc role primary
sdlc vmac 4000.1234.5600
sdlc address C1 xid-poll
sdlc partner 4001.3745.1088 C1
sdlc address C2 xid-poll
sdlc partner 4001.3745.1088 C2
sdlc dlsw C1 C2
In the following example, all devices are type PU 2.1 (Method 2):
interface serial 2
mtu 4400
no ip address
encapsulation sdlc
no keepalive
clockrate 19200
sdlc role prim-xid-poll
sdlc vmac 4000.1234.5600
sdlc address C1
sdlc partner 4001.3745.1088 C1
sdlc address C2
sdlc partner 4001.3745.1088 C2
sdlc dlsw C1 C2
DLSw+ with LLC2-to-SDLC Conversion Between PU 4-to-PU 4 Communication
Example
The following example is a sample configuration for LLC2-to-SDLC conversion for PU 4-to-PU 4
communication as shown in Figure 134:
Figure 134 LLC2-to-SDLC Conversion for PU 4-to-PU 4 Communication
Token
Ring
Frame Relay
S6283