user manual
Table Of Contents
- Cisco Content Engine 511 and 566 Hardware Installation Guide
- Contents
- Preface
- Introducing the Content Engine
- Preparing to Install the Content Engine
- Installing the Content Engine
- Installing Hardware Options
- Troubleshooting the System Hardware
- Maintaining the Content Engine
- Index
4-13
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 4 Installing Hardware Options
Working with Hard Disk Drives
Step 5 Install the hard disk drive in the bay.
a. Align the drive assembly (see Figure 4-5) with the guide rails in the bay.
b. Gently push the drive assembly into the drive bay until the drive connects to
the backplane.
c. Check the hard disk drive status LED to verify that the hard disk drive is
operating properly.
If the amber hard disk drive status LED for a drive is lit continuously, that
individual drive is faulty and needs to be replaced. If the green hard disk drive
activity LED is flashing, the drive is being accessed.
Figure 4-5 Installing a SATA Hard Disk on CE-511
124005
SATA hard disk
drive connector
Hard disk drive